Quick Answer
Does N&T E-commerce supply pipe fittings in bulk?
Yes. N&T E-commerce supplies pipe fittings in wholesale and container-load quantities to importers, wholesalers, retailers and project buyers worldwide, with export-ready packing, shipping documents and quotes on FOB or CIF terms.
Change of Direction
Elbows
Pipe elbows are fittings that change the direction of a pipe run, usually by 90 or 45 degrees. They are among the most used fittings, since nearly every plumbing layout turns corners.
Elbows are supplied in PVC, CPVC, PPR, GI, brass and copper to match the pipe material, in equal and reducing sizes, with plain, threaded or socket ends.
- Turning pipes at walls and corners
- Connecting risers to horizontal lines
- Routing around beams and fixtures
- Drainage and supply layouts
Branch Connections
Tees
Pipe tees are T-shaped fittings that split one pipe into two, or join two lines into one. They are used wherever a branch line is taken off the main supply or drain.
Equal tees have three openings of the same size, while reducing tees have a smaller branch. Tees are supplied in all common pipe materials with plain, socket or threaded ends.
- Branch lines to taps and fixtures
- Splitting supply between rooms
- Joining drain lines
- Manifold and header connections
Straight Joints
Couplings
Pipe couplings join two pipes in a straight line. They are used to extend a pipe run or to repair a damaged section of pipe without changing the layout.
Standard couplings connect pipes of the same size, reducing couplings connect different sizes, and repair couplings slide over a cut pipe to close a gap. They are available in plastic, GI, brass and copper.
- Extending straight pipe runs
- Repairing damaged pipes
- Joining pipe lengths on site
- Connecting new lines to existing ones
Removable Joints
Unions
Pipe unions are three-part fittings that join two pipes and can be opened later without cutting the pipe. They are fitted next to pumps, valves, heaters and meters that may need to be removed.
A union has two ends that attach to the pipes and a nut that pulls them together, sealing with a gasket or a machined seat. Unions are supplied in GI, brass, PVC and CPVC.
- Pumps and motors
- Water heaters and boilers
- Meters and filters
- Any joint that needs servicing
Size Transitions
Reducers
Pipe reducers connect a larger pipe to a smaller one so the line can change size. They keep flow smooth where a main narrows into a branch or a fixture connection.
Concentric reducers keep the pipe centre in line, while eccentric reducers keep one side flat, which helps avoid trapped air or sediment. Reducers and reducing bushes are supplied in all common pipe materials.
- Mains narrowing to branch lines
- Pump suction and delivery
- Connecting fixtures to supply lines
- Drainage size changes
Compact Size Adapters
Bushings
Pipe bushings are short adapter fittings that reduce the size of a fitting's opening, so a smaller pipe or fitting can be connected directly into a larger one.
Bushings are more compact than reducers and usually have male threads outside and female threads inside, or socket ends for plastic pipe. They are supplied in GI, brass, PVC and CPVC.
- Reducing tee and elbow outlets
- Connecting gauges and valves
- Tight spaces where reducers do not fit
- Adapting between pipe sizes
Competitive Export Pricing
N&T E-commerce provides competitive prices for worldwide customers, 20% lower than the average wholesale price. With 16+ years of experience, we export to 90+ countries and work with 20,000+ customers around the world. Are you looking for pipe fittings for your brand or wholesale business? N&T E-commerce is your best choice. Custom specifications are available as per your requirements, and the minimum order quantity is confirmed with your quote.
Overview
About Pipe Fittings
Fittings connect and direct pipe runs, so they must match the pipe material and size exactly. N&T E-commerce supplies elbows, tees, couplings, unions and reducers for plumbing networks in homes and commercial buildings.
Elbows change direction, tees create branches, couplings and unions join pipes, and reducers connect different sizes. Send us your fitting list by type, size and material, and we will supply it packed by size for easy handling.
Global Supply
Wholesale Pipe Fittings Supply for Global Buyers
N&T E-commerce supports global importers, wholesalers, distributors and plumbing contractors, mep contractors and builders & developers with export-ready wholesale pipe fittings. Our supply model focuses on consistent sourcing, system matching, careful export packing, shipment readiness and documentation coordination for smoother import planning.
Fittings join pipes, change direction, split flow and change sizes. They must match the pipe material, size and joining method exactly. These are the main fitting groups we supply.
Product Range
Pipe Fittings Options We Supply
Direction & Branch Fittings
Elbows and tees that turn pipe runs and take off branch lines.
- Elbows
- 90° and 45°, equal and reducing
- Tees
- Equal and reducing tees
- Others
- Bends, crosses and Y-junctions for drainage
- Materials
- PVC, CPVC, PPR, GI, brass and copper
- Ordered by
- Type, material, size, end type and quantity
Joining Fittings
Couplings and unions that join pipes in a straight line, permanently or so they can be opened later.
- Couplings
- Equal, reducing and repair couplings
- Unions
- Three-piece unions for removable joints
- Adapters
- Male and female threaded adapters (MTA / FTA)
- Materials
- PVC, CPVC, PPR, GI, brass and copper
- Ordered by
- Type, material, size, thread and quantity
Size-Change Fittings
Reducers and bushings that connect pipes and fittings of different sizes.
- Reducers
- Concentric and eccentric reducers
- Bushings
- Reducing bushes, threaded or socket
- Others
- End caps, plugs and nipples
- Materials
- PVC, CPVC, PPR, GI, brass and copper
- Ordered by
- Type, material, size pair and quantity
Compare
How to Choose: Fitting Material
Fitting material must match the pipe system. This comparison shows which fittings go with which pipes.
| Compare | PVC / CPVC | PPR | GI | Brass / Copper |
|---|---|---|---|---|
| Used with | PVC or CPVC pipes | PPR pipes | GI pipes | Copper, PEX and as transition fittings |
| Joining | Solvent cement | Heat fusion | Threaded | Threaded, soldered, compression or press |
| Hot water | CPVC yes; PVC no | Yes | Yes | Yes |
| Strength | Moderate | Good | High | High |
| Best for | Building water and drainage | Hot and cold water systems | Mains, fire and exposed lines | Valves, taps and metal systems |
| Watch out | Use matching cement | Needs a fusion tool | Use thread sealant | Higher cost |
Buyer Types
Industries and Buyer Types We Serve
Fittings are ordered in many sizes and types at once, so we quote from your fitting list.
Features & Uses
Pipe Fittings Features and Applications
Where Pipe Fittings Is Used
- Water supply networks
- Drainage and waste lines
- Residential plumbing
- Commercial and hotel projects
- Repairs and maintenance
- Plumbing retail and distribution
What to Share for an Accurate Quote
- Fitting type (elbow, tee, coupling, union or reducer)
- Pipe material the fitting is for
- Size and connection type (threaded, solvent or press)
- Angle or reduction size where relevant
- Quantity per size
- Delivery port or city
Quality & Packing
Packing, Quality Checks and Documentation
Fittings must fit the pipe exactly; a small size or thread mismatch causes leaks. Each order is checked and packed by type and size.
Quality Checks
- Size, socket depth and thread checked
- Material and pressure rating checked
- Visual check for cracks and casting defects
- Threads checked on metal fittings
System Matching
- Fittings matched to pipe material and joining method
- Thread standard confirmed (e.g. BSP or NPT)
- Transition fittings suggested between materials
- Solvent cement or sealants added on request
Export-Safe Packing
- Packed in bags or boxes by type and size
- Cartons labelled clearly for site sorting
- Cartons palletised and wrapped
- Metal fittings protected from moisture
Documents
- Commercial invoice, packing list and certificate of origin
- Itemised list by type and size
- Fumigation certificate for wooden pallets where required
- Other import paperwork arranged on request
Our Experience
Our Expertise
Our team brings the N&T Group's 16+ years of export trade experience to every pipe fittings order. We know the details that matter to pipe fittings buyers, from direction & branch fittings, joining fittings and size-change fittings to quality checks, system matching, export-safe packing and documents, and we coordinate sourcing, checks, packing and documents so each shipment arrives as specified and clears customs smoothly.
Order Flow
Export Process for Wholesale Bulk Orders
Fitting orders usually start from an itemised list and follow a few clear steps.
- Share your fitting list: Send types, materials, sizes, thread standards, quantities and delivery port.
- List check: We confirm availability and suggest equivalents for any item not available.
- Quotation: You receive an itemised quotation on FOB or CIF terms.
- Order confirmation: The final list and quantities are confirmed in writing.
- Sourcing and checks: Fittings are sourced and checked for size, thread and condition.
- Packing: Packed by type and size, labelled, palletised and wrapped.
- Shipping and documents: The shipment is booked and export documents are shared for customs clearance.
Markets We Serve
Our Global Customer Base
N&T E-commerce Pvt. Ltd. supports international B2B buyers with export-focused supply of plumbing materials, including pipe fittings for plumbing contractors, mep contractors, builders & developers and irrigation installers. We serve buyers across the Middle East, Africa, Europe, the Americas and Asia-Pacific, and work with importers, wholesalers, distributors and brands looking for dependable long-term wholesale pipe fittings supply.
Country Links
Explore Pipe Fittings Supply by Country
Choose your country for local supply details, shipping terms and a quote.
Why Choose Us
Why Choose N&T E-commerce as Your Global Wholesale Pipe Fittings Supplier & Exporter
N&T E-commerce Pvt. Ltd. is backed by the N&T Group's 16+ years of business experience, bringing structured sourcing, export coordination and long-term B2B supply support to international buyers. For wholesale pipe fittings orders, we focus on dependable product sourcing, quality checks, system matching, export-safe packing and documents, documentation coordination and smooth support for plumbing contractors, mep contractors and builders & developers.
Trusted N&T Group Company
Backed by a strong group company foundation and 16+ years of business experience, N&T E-commerce brings credibility, structured processes and long-term commitment to international plumbing materials supply.
Reliable Wholesale Supply Support
As a wholesale pipe fittings supplier and exporter, we support bulk buyers with dependable sourcing, product consistency and a choice of direction & branch fittings, joining fittings and size-change fittings.
Support for Importers and Wholesalers
We support plumbing contractors, mep contractors, builders & developers and irrigation installers with repeat bulk pipe fittings supply, suitable packing and documentation coordination.
Verified Quality and Genuine Sourcing
Every pipe fittings order is checked before dispatch: size, socket depth and thread checked, material and pressure rating checked and visual check for cracks and casting defects.
Strong Global Trade Network
Our trade coordination supports smoother pipe fittings shipments to the Middle East, Africa, Europe, the Americas and Asia-Pacific, with clear buyer communication and long-term supply continuity.
Transparent and Secure Deal Process
Clear quotes on FOB or CIF terms, structured documentation and practical order coordination for pipe fittings buyers, from inquiry to dispatch.
Export-Safe Packing and Documentation Support
Packed in bags or boxes by type and size; cartons labelled clearly for site sorting, with commercial invoice, packing list and certificate of origin for every shipment.
16+ Years Expert Team and Dedicated Customer Support
Our experienced team supports pipe fittings buyers from requirement discussion to delivery coordination, helping build reliable long-term supply partnerships.
Vision & Mission
Our Pipe Fittings Vision, Mission & Values
Vision
To be a preferred wholesale pipe fittings supplier and exporter known for quality products, reliable delivery support and strong long-term partnerships with plumbing contractors, mep contractors, builders & developers and irrigation installers.
Mission
To support global buyers with quality wholesale pipe fittings, export-ready packing, smooth documentation coordination and dependable service that simplifies sourcing, import handling and repeat bulk supply.
Values
Quality, transparency, consistency and customer trust define how we supply pipe fittings. We stand for accurate sizing, correct threads, clear labelling and straightforward communication.
Frequently Asked Questions
Find answers to common questions about our pipe fittings supply, export services and global trade support.
We supply elbows, tees, couplings, unions and reducers for common pipe materials and sizes.
Yes. Fittings are packed by type and size in labelled cartons so a full fitting list can ship together.
A coupling joins two pipes permanently in a straight line. A union also joins two pipes but has a nut that lets the joint be opened later without cutting, so it is used next to pumps, heaters and valves.
A reducer connects two pipes of different sizes in line. A bushing fits inside a larger fitting's opening to take a smaller pipe or fitting, and is more compact.
Threaded fittings can be supplied in the standard your market uses, such as BSP or NPT. Tell us the standard so the fittings match your pipes and valves.
Yes. PVC, CPVC, PPR, GI, brass and copper fittings can be combined in one shipment, along with transition fittings between materials.
Fittings are packed in bags or boxes by type and size, with labels on each carton, then palletised and wrapped.
A concentric reducer keeps both pipes on the same centre line. An eccentric reducer keeps one side flat, which helps avoid trapped air in pump suction lines or sediment in horizontal lines.
We quote on FOB or CIF terms. Tell us your nearest port and we will include freight where you need it. Every shipment goes with an invoice, packing list and certificate of origin.
Share your fitting type (elbow, tee, coupling, union or reducer), pipe material the fitting is for, size and connection type (threaded, solvent or press), angle or reduction size where relevant, quantity per size and delivery port or city. We will reply with availability, pricing, packing details and lead time.
Yes. Share photos, a sample or the specification, and we will confirm the closest matching pipe fittings we can supply before you place the order.
The minimum order quantity depends on the product, size and finish, and is confirmed with your quote. Combining pipe fittings with other products in one shipment can help fill a container.
Yes. Repeat orders are supported, and earlier specifications are matched where possible so your pipe fittings stock stays consistent from order to order.
N&T E-commerce is based in Gujarat, India and exports worldwide. Our country pages for 40 key markets give local import details, and buyers in every other country are supplied the same way.
Contact us
Get your Free Quote Today!
Phone number
Office
3rd Floor, Diamond Complex, SH 41, Industrial Area, Chhapi, North Gujarat, India. 385210
Empowering Global Trade: N&T E-commerce's Commitment to Excellence and Sustainable Partnerships.
Contact us
3rd Floor, Diamond Complex, SH 41, Industrial Area, Chhapi, North Gujarat, India. 385210
Copyright © 2026 N&T Ecommerce Pvt. Ltd. All Rights Reserved.
Developed by N&T Software. Reach out if you have any inquiry regarding any software.